Duplo DF-755 Bedienungsanleitung

INSTRUCTION MANUAL -Duplo Folder DF-755 Be sure to read this manual prior to use. -Please leave this manual at the site of use for easy reference. -ht

Safety PrecautionsMemo vi http://www.monomachines.com/http://www.monomachines.com/For More InfoClick Here --->

Chapter 1 BEFORE OPERATION http://www.monomachines.com/http://www.monomachines.com/For More InfoClick Here --->

Chapter 1 BEFORE OPERATION 1. Features The DF-755 is designed to fold paper into six popular folding patterns and is capable of folding up to

Chapter 1 BEFORE OPERATION 2. Setting Up the Machine 2-1. Components [1] [2] [3] [4] [5] [6] [7] No. Name Qty. Remark [1] First folding pla

Chapter 1 BEFORE OPERATION 1 To remove the press release lever (A) on the non-operator's side, push it inwards and pull it out. Press release lev

Chapter 1 BEFORE OPERATION 2 Turn the bearing support lever on the non-operator's side in the direction of the arrow. The bearin

Chapter 1 BEFORE OPERATION 3 Make a ground connection using the earth wire attached to the power plug. ● Make sure that you make a ground connecti

Chapter 1 BEFORE OPERATION3. Names and Functions Under the main cover [1] [4] [5] [6] [7] [8] [9] [11] [12] [13] [14] [15] [16] [17] [18] [2] [3] [19

Chapter 1 BEFORE OPERATION No. Name [1] First folding plate [2] Fine adjustment knob [3] Rough adjustment knob [4] Control panel [5] Second fol

Chapter 1 BEFORE OPERATION4. Describing Control Panel [1] [3] [2][4] No. [1] [2] [3] [4] Name Counter/LCD display Stop button Start button C (clear

http://www.monomachines.com/http://www.monomachines.com/For More InfoClick Here --->

Chapter 1 BEFORE OPERATION 5. Handling Paper 5-1. Paper Used ● Make sure that the printing ink on the paper has dried completely prior to use. ● If

Chapter 1 BEFORE OPERATION Paper set lever Paper Guide plate● When stacking just a few sheets of paper on the paper feed table, lower the paper set

Chapter 1 BEFORE OPERATION 6. Emergency Stop An emergency stop device to ensure safety has been installed to the top cover. Opening the cover during

Chapter 2 BASIC OPERATION http://www.monomachines.com/http://www.monomachines.com/For More InfoClick Here --->

Chapter 2 BASIC OPERATION1. Standard Folding of Standard Paper 1-1. Standard Paper There are six types of standard paper sizes; LD, LG and LT. Pape

Chapter 2 BASIC OPERATION 1-3. Operation Procedures 1 Insert the power cord in the wall socket and turn on the power. Press “ I ” to turn on the powe

Chapter 2 BASIC OPERATION 5 Lower the paper set lever. The paper feed table will be raised. Make sure that you lower the paper set lever. If you start

Chapter 2 BASIC OPERATION Paper feed pressure adjustment knob7 Set the paper feed pressure adjustment knob to “Thin paper.” If the pap

Chapter 2 BASIC OPERATION 11 Check the finish of test folding. Check for folding misalignment using the second test folded sample. If folding misa

Chapter 2 BASIC OPERATION 1) Slide the rough adjustment knob of the second folding plate up to the upper end while lifting it up. 2) Turn the fine

“This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These lim

Chapter 2 BASIC OPERATIONMemo 2-8 http://www.monomachines.com/http://www.monomachines.com/For More InfoClick Here --->

Chapter 3 ADVANCED OPERATION http://www.monomachines.com/http://www.monomachines.com/For More InfoClick Here --->

Chapter 3 ADVANCED OPERATION 1. Single Folding of Standard Paper 1-1. Single Folding Thick Paper When folding drawing paper or fine quality thick pa

Chapter 3 ADVANCED OPERATION 5 After completing adjustments, press the C (clear) button for more than two seconds to clear the counter to "0.&qu

Guide plate Chapter 3 ADVANCED OPERATION 1-2. Double Folding Thick Paper When folding fine quality thick paper 28 lb into four, its folding section ma

Chapter 3 ADVANCED OPERATION 5 Move the stacker rollers to "5." Stacker roller Stacker roller6 While lifting up the stacker rollers Leverwi

Chapter 3 ADVANCED OPERATION 10 Check the finish of test folding. Check for folding misalignment using the second test folded sample. If folding m

Chapter 3 ADVANCED OPERATION Stacker roller13 After the operations have completed, move the left and right Stacker leverlevers attached to the stack

Chapter 3 ADVANCED OPERATION 1-3. Double Folding Small Thin Paper Paper jam may occur when folding 5.00 (W) x 7.00 (L) inch size fine quality paper of

Chapter 3 ADVANCED OPERATION 4 Press the Start button for test folding and check if the paper is ejected smoothly. 5 Press the Stop button after a

Introduction Thank you for purchasing a Duplo product. Be sure to read this manual prior to using the product. After reading, leave the manual

Chapter 3 ADVANCED OPERATION 9 Press the Start button to start folding operations. Press the Stop button to interrupt or stop the operations. Pressi

Chapter 3 ADVANCED OPERATION2. Custom Folding of Standard Paper Custom folding is the method of folding paper where you specify the folding stoppers

Chapter 3 ADVANCED OPERATION Accordion fold (example)5 Fold a piece of paper as desired and measure the dimensions of the A, B and C. The folding s

8 Chapter 3 ADVANCED OPERATION Move the stacker rollers to the appropriate position referring to Table of Stacker Rollers Position on

Chapter 3 ADVANCED OPERATION 12 After completing adjustments, press the C (clear) button for more than two seconds to clear the counter to "0.

Chapter 3 ADVANCED OPERATION 3. Standard Folding of Non-Standard Size Paper Paper other than the six standard size paper are called non-standard s

Guide plate Chapter 3 ADVANCED OPERATION 3 Move the stacker rollers to the appropriate position. Refer to Table of Stacker Rollers Position for their

Chapter 3 ADVANCED OPERATION 7 Lower the paper set lever. The paper feed table will be raised. Make sure that you lower the paper set lever. If yo

Chapter 3 ADVANCED OPERATION 12 Press the Start button to start folding operations. Press the Stop button to interrupt or stop the operations. Pre

Chapter 3 ADVANCED OPERATION 4. Cross Folding Cross folding is to fold single-folded paper another time into two or three. C

Safety Precautions Safety Precautions In this manual, operations and handling of the unit which are hazardous are described using

Chapter 3 ADVANCED OPERATION Paper 36 mm Side guide Paper set lever 3 Raise the paper set lever and stack the single-folded paper on the paper f

Chapter 3 ADVANCED OPERATION 8 Move the rough adjustment knob of the second folding plate to the upper end. ● The rough adjustment knob cann

Chapter 3 ADVANCED OPERATION 14 Take out the cross folding lever stored inside the top cover. 15 Close the top cover. 16 Attach the cross foldi

Chapter 3 ADVANCED OPERATION 18 Press the Start button for test folding. 19 Press the Stop button after a couple of folded sheets are ejected.

Chapter 3 ADVANCED OPERATION Note that you cannot move onto the next procedure until you place paper on the paper feed table. 23 Store the cross fold

Chapter 3 ADVANCED OPERATION Paper 36 mm Side guide Paper set lever 4 Raise the paper set lever and stack the single-folded paper on the p

Chapter 3 ADVANCED OPERATION 1) According to the table of rough adjustment knob positions, move the knob of the first folding plate to 6.00 inches

Chapter 3 ADVANCED OPERATION 5. Correcting Folding Misalignment Folding misalignment consists of two types; “fold

Chapter 3 ADVANCED OPERATION Folding Style Fold Surface A Adjustment First folding plate Fine adjustment knob Accordion Feeding directio

Chapter 3 ADVANCED OPERATION Adjusting Fine Adjustment Knob of the Second Folding Plate Folding Style Fold Surface A Adjustment First folding plat

Safety Precautions Operating Environment Operate this unit in the following environment. ● where the temperature

Chapter 3 ADVANCED OPERATION 5-2. Correcting Folding Misalignment along Sides of Paper When folded paper is misalign

Chapter 4 TROUBLESHOOTING GUIDE http://www.monomachines.com/http://www.monomachines.com/For More InfoClick Here --->

Chapter 4 TROUBLESHOOTING 1. Correcting Deformed Folding Check the following when deformed folding occurs. Deformed folding ● Fan the paper well bef

Chapter 4 TROUBLESHOOTING2. Removing Jammed Paper When paper jam has occurred, "PAPER ERR" will be displayed on the LCD display. Check the

Chapter 4 TROUBLESHOOTING 2-3. When Paper Has Coiled Around the Rubber Roll Turn off the machine before following the procedures below.

Chapter 4 TROUBLESHOOTING 2-4. When Paper Has Jammed at the First Folding Plate 1 Remove the first folding plate from the machine. 2 Open the top cove

Chapter 4 TROUBLESHOOTING 2-5. When Paper Has Jammed at the Second Folding Plate Turn off the machine before following the procedures below. 1 Move

Chapter 4 TROUBLESHOOTING 2-6. When Paper Has Jammed Near the Stacker Remove the paper stuck in the stacker section towards you. Paper 4-7 http://w

Chapter 4 TROUBLESHOOTING 3. Error Messages When a paper jam has occurred or the top cover is open, an error message is displayed on the LCD

Chapter 4 TROUBLESHOOTING 4. Troubleshooting When trouble has occurred, find the symptom from the table below and solve the trouble acco

Safety Precautions Maintenance / Other Do not damage the power cord or power plug. Do not scratch, alter, bend, twist, pull or place heavy ob

Chapter 4 TROUBLESHOOTING Symptom Cause Solution Paper slips at the paper feed section frequently. The paper feed pressure adjustment

Chapter 5 CLEANING THE UNIT http://www.monomachines.com/http://www.monomachines.com/For More InfoClick Here --->

Chapter 5 CLEANING THE UNIT 1. Cleaning Each Section The adherence of paper dust and printing ink on the rubber r

Chapter 5 CLEANING THE UNIT 3 While rotating the rubber roll, clean off the dirt with a cloth moistened with alcohol. Rubber roll 1-2. Cleaning the P

Chapter 5 CLEANING THE UNIT 1-3. Cleaning the Paper Separator 1 Open the top cover. 2 Insert a cloth moistened with alcohol between the paper feed ri

Chapter 5 CLEANING THE UNIT 1-5. Cleaning the Ejection Gate Sensor Clean the ejection gate sensor, located on the back of the stacker rollers using an

Chapter 5 CLEANING THE UNITMemo 5-6 http://www.monomachines.com/http://www.monomachines.com/For More InfoClick Here --->

Chapter 6 APPENDIX http://www.monomachines.com/http://www.monomachines.com/For More InfoClick Here --->

Chapter 6 APPENDIX 1. Specification Model DF-755 Type Office use, desktop Paper size Min. 5.00 (W) x 7.00 (L) inches that can be folded Max. 11.00

Chapter 6 APPENDIXMemo 6-3 http://www.monomachines.com/http://www.monomachines.com/For More InfoClick Here --->

Safety Precautions WARNING / CAUTION Labels "WARNING" and "CAUTION" labels are pasted on the machine to ensure user safety. Do no

         86V-7

Safety Precautions Contents Introduction.........